Power Steering Filter Kit
Models This Product Fits
- M5 E39
- M5 E60
- M6 E63
- M6 Conv. E64
|Description||Billet Power Steering Reservoir Replacement Filter|
Begin by removing the power steering reservoir from the vehicle.
Using strap wrench, unscrew the top of the reservoir.
Remove the bolt (5mm allen) from the center of the filter and remove filter. Remove the small o-ring under the filter. Clean filter housing for any debris. Install small o-ring (to keep o-ring in grove, a small amount of the supplied grease can be used). Install filter. Install bolt/washer and tighten to 60 inch pounds (5Ft. lbs). Remove the large o-ring in reservoir top. Install new large o-ring. Apply film grease to o-ring. Screw top on and hand tighten with strap wrench.
CAUTION: If the threads don't line up perfectly when screwing the top on the reservoir, the reservoir will be damaged.
Once the reservoir is back together, install in vehicle per the instructions above.