Skip to content
The AGA Clean Oil Torque Wrench is pre-set to a torque of 1.8Nm, the exact value recommended for tightening the sealing cap of the AGA Clean Oil Drain Plug. It is supplied with an extended driver and 19mm socket as part of the kit. This T-style handle is highly recommended.

Clean Oil Torque Wrench

SKU AGA-COTW
$29.95 - $29.95
$29.95
$29.95 - $29.95
$29.95

This wrench is pre-set to 1.8Nm—the exact torque specification required for the dust cap on the AGA Clean Oil Drain Plugs. Using this ensures proper tightening while preventing damage from over-torqueing.

Keep in mind, this torque wrench is unidirectional, designed specifically for tightening, though you can also use it to remove the dust cap if needed.

It is supplied with an extended driver and 19mm socket as part of the kit.

Note: Before installing the dust cap, inspect the O-ring on the drain plug. If it’s worn or damaged, be sure to replace it. Replacement O-rings are available.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare